Free shipping for all ordes over $500+
Logotipo LEDBeith United States

[NLCDJN10XB4] Connector Strip Led Rgb To Cable 4 Wires 12v Clip on Snap

[NLCDJN10XB4] Connector Strip Led Rgb To Cable 4 Wires 12v Clip on Snap

$0.77

Description The 4-pin LED light strip connector is a stripless solution to quickly connect the 5050 RGB light strip to a 4-conductor flat cable. No welding, no peeling, no twisting. Just put the light from the waterproof tape over the pin (no need to remove the waterproof coating) and press the cap down, the pin will pass through the FPCB from the back and make contact with the copper layer. When connected to the wire, the pin can pierce the wire insulation and contact the wire core inside. All of this can be done with pliers, which means it can really free you from the difficult and dangerous operation of soldering iron. 1) Type of LED strip Can work with RGB Normal LED strip with waterproof coating on diode Chasing digital LED strip like WS2813 Other IP65 / IP54 10mm LED strip light with 4 solder pads SPECIAL NOTE: This connector DOES NOT It is for PURE SILICON LED strip light with waterproof coating. Specific version for SILICON light strip, Package includes 4-pin LED strip connector: Technical data Working voltage: below 24V Maximum pin current: 5A Number of pins: 4 pins Workable cable Gauge: 22 ~ 20AWG / 0.34 ~ 0.54mm² Workable Strip Light Width: 10mm Workable PCB Thickness: 0.2 ~ 0.35mm Working Temp TEMP .: -20 ~ 50 ? Heat Resistance: 105 Dim Connector Dimension: 24.314.67.7mm Features: Make sure this fits. entering your model number. One end of this LED strip connector for 4-conductor flat RGB extension cable and another end for waterproof RGB strip light. The transparent lid design will allow light to pass through, hardly casting dark shadows in your lighting space. ONLY for epoxy strip and waterproof PU. If you need waterproof or non-waterproof waterproof coating, look for -> B01N9QXW04 Penetrate PCB to connect without stripping waterproof coating and wire insulation (insulation piercing contact). The DIY-to-wire RGB connector in any length you want, no board-to-wire input or board-to-board jumper, extension distance and angle are no more trouble for you The end of the strip light can work with a 10mm width SMD5050 rgb waterproof strip light and a WS2813 pixel tape (both below 96LEDs / meter) , the end of the wire can work with 4-conductor wire with a range of 22 ~ 20AWG / 0.34 ~ 0.54mm2 (without silicone wire) This 4-pin strip light connector is durable and powerful, it is made of copper of low resistance and flame retardant PC. It can withstand up to 5 A (R, G, B, 3 channels) of current, allowing you to extend the longest and safest continuous LED strip. single connector lighting Product details: Color: For RGB 10mm Waterproof, Strip to Wire Style: Wire splicing board. Finish: Copper Material: Copper / Polycarbonate Power Source: DC Voltage:

Availability: 8 in stock

SKU NLCDJN10XB4 Categories ,
Share This Items :

Description The 4-pin LED light strip connector is a stripless solution to quickly connect the 5050 RGB light strip to a 4-conductor flat cable. No welding, no peeling, no twisting. Just put the light from the waterproof tape over the pin (no need to remove the waterproof coating) and press the cap down, the pin will pass through the FPCB from the back and make contact with the copper layer. When connected to the wire, the pin can pierce the wire insulation and contact the wire core inside. All of this can be done with pliers, which means it can really free you from the difficult and dangerous operation of soldering iron. 1) Type of LED strip Can work with RGB Normal LED strip with waterproof coating on diode Chasing digital LED strip like WS2813 Other IP65 / IP54 10mm LED strip light with 4 solder pads SPECIAL NOTE: This connector DOES NOT It is for PURE SILICON LED strip light with waterproof coating. Specific version for SILICON light strip, Package includes 4-pin LED strip connector: Technical data Working voltage: below 24V Maximum pin current: 5A Number of pins: 4 pins Workable cable Gauge: 22 ~ 20AWG / 0.34 ~ 0.54mm² Workable Strip Light Width: 10mm Workable PCB Thickness: 0.2 ~ 0.35mm Working Temp TEMP .: -20 ~ 50 ? Heat Resistance: 105 Dim Connector Dimension: 24.314.67.7mm Features: Make sure this fits. entering your model number. One end of this LED strip connector for 4-conductor flat RGB extension cable and another end for waterproof RGB strip light. The transparent lid design will allow light to pass through, hardly casting dark shadows in your lighting space. ONLY for epoxy strip and waterproof PU. If you need waterproof or non-waterproof waterproof coating, look for -> B01N9QXW04 Penetrate PCB to connect without stripping waterproof coating and wire insulation (insulation piercing contact). The DIY-to-wire RGB connector in any length you want, no board-to-wire input or board-to-board jumper, extension distance and angle are no more trouble for you The end of the strip light can work with a 10mm width SMD5050 rgb waterproof strip light and a WS2813 pixel tape (both below 96LEDs / meter) , the end of the wire can work with 4-conductor wire with a range of 22 ~ 20AWG / 0.34 ~ 0.54mm2 (without silicone wire) This 4-pin strip light connector is durable and powerful, it is made of copper of low resistance and flame retardant PC. It can withstand up to 5 A (R, G, B, 3 channels) of current, allowing you to extend the longest and safest continuous LED strip. single connector lighting Product details: Color: For RGB 10mm Waterproof, Strip to Wire Style: Wire splicing board. Finish: Copper Material: Copper / Polycarbonate Power Source: DC Voltage:

Reviews

There are no reviews yet.

Be the first to review “[NLCDJN10XB4] Connector Strip Led Rgb To Cable 4 Wires 12v Clip on Snap”

Your email address will not be published.

Far far away, behind the word mountains, far from the countries Vokalia and Consonantia there live the blind texts.