Free shipping for all ordes over $500+
Logotipo LEDBeith United States

[LBDMX512T1000S] Controller For Led Pixel T1000s

[LBDMX512T1000S] Controller For Led Pixel T1000s

$25.30

DMX LED controller for digital LED strips or pixel and digital LED modules, suitable for WS2811 protocol, 5v or 12-24v voltage input. It has an SD card slot (INCLUDED) and predefined programs in the absence of a card. This DMX controller is indispensable for using digital type LEDs, both digital LED strips (also called “Magic led strip”) and for pixel LED modules. This controller sends the signals to the diodes so that each led lights up separately in sequences and sets the rhythm and color of each of the LEDs to form colored effects. It incorporates a slot to insert an SD card (INCLUDED) to introduce the instructions of the sequences that we want the LEDs to do. This driver supports various streaming protocols, but the best known and without a doubt the most used is the WS2811 or WS2812 protocol. Files in * .pxb format can be entered which will be translated into programs for the controller. The buttons on the top of the DMX LED are used to change programs, make a program repeat continuously, and increase and decrease the speed at which programs are played. If it does not contain any card in the slot, it incorporates predefined programs to be able to do tests and even some programs with slightly more complex effects in case we do not decide to create our own. To create the color effect programs for the DMX LED we recommend the use of LED MAGIC or PIXEL LED, which can be found on many of the websites within the search results of any Internet search engine for the word ledbeith. We recommend this version as it is more stable than some later editions and more complete than previous versions. Description: Card Type: SD Card Capacity: 128MB-2GB Physical Parameters: Operating Temperature: -Centigrade Operating Voltage: DC5V / DC7.5-24V Operating Power: 2W Weight: 0.3kg Size: L165mm × W80mm × H30mm Signal port: T-1000S system 1.32-65536 3-pin connection port gray, compatible with software gamut correction. 2. Support point, line, surface, standards and specially shaped handle. 3. Single port output, can support 2048 pixels. 4. Multiple controllers can be cascaded and work synchronously, Play the content stored in the SD card. 5. Compatible with single line or double line chips. Note: When the T1000S controller loads less than 512 pixels, the frame rate can reach 30 fps. When the T-1000s controls more than 512 pixels, the frame speed automatically slows down. Package: 1x T1000S Controller 1x SD Card 1Xmini Screw Driver

Availability: 95 in stock

SKU LBDMX512T1000S Category
Share This Items :

DMX LED controller for digital LED strips or pixel and digital LED modules, suitable for WS2811 protocol, 5v or 12-24v voltage input. It has an SD card slot (INCLUDED) and predefined programs in the absence of a card. This DMX controller is indispensable for using digital type LEDs, both digital LED strips (also called “Magic led strip”) and for pixel LED modules. This controller sends the signals to the diodes so that each led lights up separately in sequences and sets the rhythm and color of each of the LEDs to form colored effects. It incorporates a slot to insert an SD card (INCLUDED) to introduce the instructions of the sequences that we want the LEDs to do. This driver supports various streaming protocols, but the best known and without a doubt the most used is the WS2811 or WS2812 protocol. Files in * .pxb format can be entered which will be translated into programs for the controller. The buttons on the top of the DMX LED are used to change programs, make a program repeat continuously, and increase and decrease the speed at which programs are played. If it does not contain any card in the slot, it incorporates predefined programs to be able to do tests and even some programs with slightly more complex effects in case we do not decide to create our own. To create the color effect programs for the DMX LED we recommend the use of LED MAGIC or PIXEL LED, which can be found on many of the websites within the search results of any Internet search engine for the word ledbeith. We recommend this version as it is more stable than some later editions and more complete than previous versions. Description: Card Type: SD Card Capacity: 128MB-2GB Physical Parameters: Operating Temperature: -Centigrade Operating Voltage: DC5V / DC7.5-24V Operating Power: 2W Weight: 0.3kg Size: L165mm × W80mm × H30mm Signal port: T-1000S system 1.32-65536 3-pin connection port gray, compatible with software gamut correction. 2. Support point, line, surface, standards and specially shaped handle. 3. Single port output, can support 2048 pixels. 4. Multiple controllers can be cascaded and work synchronously, Play the content stored in the SD card. 5. Compatible with single line or double line chips. Note: When the T1000S controller loads less than 512 pixels, the frame rate can reach 30 fps. When the T-1000s controls more than 512 pixels, the frame speed automatically slows down. Package: 1x T1000S Controller 1x SD Card 1Xmini Screw Driver

Reviews

There are no reviews yet.

Be the first to review “[LBDMX512T1000S] Controller For Led Pixel T1000s”

Your email address will not be published.

Far far away, behind the word mountains, far from the countries Vokalia and Consonantia there live the blind texts.